Trigger Module

The Trigger Module was designed in order to facilitate connections to the Trigger Port. It offers full signal conditioning to ensure that input signals are properly configured for Delsys hardware and that output signals are properly configured for secondary equipment.

EMGworks® Data Acquisition and Analysis Software offers full triggering capabilities to control the start and stop of all data acquisition systems in a given experimental setup.

Delsys Trigger Module

Features

Standard BNC connections for ease-of-use

Start and Stop Input capabilities

Trigger on rising or falling edges

Start and Stop Output signal triggers

Positive or Negative Outputs

Short and Long Pulse Outputs

5V active logic or Passive Switch logic

Push-button triggers for Remote Starting and Stopping

Compatible with

Bagnoli™ Desktop and Trigno™ Wireless Systems

Useful Links

Specifications

ELECTRICAL
Min. input signal duration 100 ns
Input Edge Type rising or falling
Output Edge Type rising or falling
Output pulse duration  150 ns or 75 ms
Logic  5V TTL or CMSO
MECHANICAL
Dimensions 205 x 108 x 57 mm
Weight 280 g
Material ABS-94HB