Download the latest EMGworks®, SDK and Avanti Android Application.

June 14th, 2018|Categories: Support|

Version: 4.5.4 Version: 3.1.2 Version: 2.0.3 EMGworks® v4.5.4 Changelog: Changes implemented to comply with GDPR New firmware compatibility notifications New SDK update notifications Improved delay after clicking start Improved orientation mode in SDK for Avanti [...]

Download the latest EMGworks® Software 4.5.3

April 6th, 2018|Categories: Support|

Updates in the latest version 4.5.3: Fixed an issue where y-min/y-max default vals for Avanti sensor was causing hang when clicking “Run Task” Some Avanti configurations were causing EMG channel to not be present in Signal Quality check Fixed issue [...]

Updating Software & Firmware for Existing Trigno™ Equipment

April 4th, 2018|Categories: Support|

To minimize costs on the user end, existing Trigno Base Stations and Sensors may require a firmware (FW) update to ensure they are compatible with new Trigno Equipment. This prevents the need to entirely replace such systems and allows for [...]

Download the latest Trigno™ Avanti Android App, EMGworks® Software and more

February 22nd, 2018|Categories: Support|

Download the latest version here. Trigno™ Avanti Android App 1.0.0 Delsys API 1.0.0 EMGworks® Software 4.5.0 Delsys File Utility 3.0.0 SDK 3.0.0 Change Log EMGworks 4.5.0 New Avanti Sensor Support! New Sensor Configuration Page – allows more complex control over [...]

Trigno™ SDK Server 2.6.11 Released

September 14th, 2017|Categories: Support|


Trigno™ SDK Server 2.6.10 Released

September 1st, 2017|Categories: Support|


Suggested Replacements for Trigno™ Wireless Standard Sensor (EMG + 3D ACC)

July 12th, 2017|Categories: Blogs, Support|

Over the better part of a decade, Delsys has advanced EMG sensor technology by continuously expanding our Trigno™ Wireless product line to accommodate the intricate needs of our customers. As a result of our advancement, we will be retiring our [...]


June 15th, 2017|Categories: News, Support|

Adding EMG to Improve mobility, stability, strength, and control measurements metrics. HUMAC Norm now directly integrates Delsys Trigno™ EMG directly into HUMAC NORM Isometric and Isokinetic resistance protocols greatly simplifying the data management process. Easily manage HUMAC /Delsys EMG (HUMAC [...]

Trigno™ Trigger Adapter Sensor Now Available

June 2nd, 2017|Categories: News, Support|

The Trigno™ Trigger Adapter is designed to allow researchers to sample 0 to ±5V signals from 3rd party lab devices alongside other Trigno™ sensors so that data from these other devices and systems can be compared with Trigno biofeedback [...]

Delsys-Visual3D Tutorials 1 and 2

May 11th, 2017|Categories: Support|

Tutorial #1: Focuses on recording eMG and inertial measurements from concentric and eccentric upper limb tasks and in this case, elbow flexion and extension. It guides one through sensor setup, data collection and post-processing analysis of the recorded data sets. [...]