Trigno Research+
Advancing research possibilities with wearable solutions for human movement assessments
With built-in WiFi and Bluetooth capabilities, this dual-purpose system enables you to record EMG + movement data from anywhere and at any time. Leveraging these abilities makes the system the optimal indoor/outdoor tool for both advanced research and mobile clinical conditions.
Trigno Wireless System
A high-performing device designed to make EMG signal detection reliable and easy.
The system is capable of streaming data digitally into EMGworks®, third-party software, or via analog outputs for integration with motion capture and other third-party data acquisition systems. Full triggering features further expand integration options for additional measurement technologies.
Research Mode
Wireless Communication: Wi-Fi
Stream data digitally into EMGworks® or via analog channels for integration
Mix and match from the entire Trigno™ EMG & Additional Sensors
Integrate with a third-party measurement technologies and synchronize data recording
Mobile Mode
Wireless Communication: Bluetooth
Record and analyze data with Mobile EMG Suite
Compatible with Trigno Avanti, Quattro, other latest-gen Trigno sensors
Trigno Avanti Sensor
Advancing the Trigno™ Platform for years to come
Our latest generation wireless sensor combines patented EMG with increased IMU performance, while supporting both Research and Mobile data collection modes.
Button-less Operation
Improved RF Performance
On-board IMU
LED Status indicators
Selectable EMG Bandwidth Settings
On-board Signal Processing
System Requirements
Windows PC
EMGworks 4.4 or later
Windows 7, 8.1, 10
One USB 2.0 port
At least 2.0 GHz processor clock speed
At least 2 GB system memory
1280×1024 (SXGA) display resolution or better
50 GB hard disk storage (minimum)
Android Device
Android V 6 (Marshmallow) operating system
BLE 4.2 support
RAM 1GB minimum
Storage 8 GB minimum
Screen Resolution 2048×1536 (recommended)
Recommended Tablet: Samsung Galaxy Tab S2 (SM-T713NZKEXAR)
8-inch screen, 32 GB, WI-FI
Specifications
Sensor Channels
1x EMG, up to 6x IMU
Reference Type
Dual on-board stabilizing reference
Inter-Electrode Spacing
10 mm
Size (Body)
27 x 37 x 13 mm
Mass
14 g
Operating Range
40 m in RF mode
Host Dependent/unlimited datalogger
Wireless Protocol
-2.400-2.483 GHz ISM Band,Proprietary RF Protocol
-BLE V4.2
EMG Bandwidths
10-850 Hz
20-450 Hz
EMG Sampling Rate (Max)
4370 sa/sec
Accelerometer Sampling Rate (Max)
963 sa/sec
Gyroscope Sampling Rate (Max)
741 sa/sec
Orientation Sampling Rate (Max)
222 sa/sec
Sensor Resolution
16 bits
EMG Baseline Noise (typical)
750 nV
EMG Input Range
11 mV / 22 mV rti
CMRR
<-80 dB
Battery Life
Up to 8 hours
Recharge Time (typical)
2.5 hours
Inter-Sensor Latency
< 1 sampling period
EMG Analog Output Delay
48 ms Fixed
ACC/Gyro Analog Output Delay
96 ms Fixed
On-Board EMG Filter
-Butterworth bandpass (40/80 dB/dec)
-RMS Envelope Calculation (100 ms window)
Real-Time IMU Orientation Filter
Quaternions or RPY (selectable)
Material
Medical Grade Polycarbonate
Seal and Protection
UV-sealed to prevent moisture from entering the sensor & to enhance patient safety
Patents
Protected by one or more of the following Patents 6480731, 6238338, 6440067, 9351559, 8971983, EP1070479